Sill Repairs

MX5s suffer from rust in areas that cause MOT failures.

 

MX5 Mk1, Mk2 and Mk2.5 suffer rust attacks to the rear of the sill and wheel arches areas.

 

It usually shows on the outer sill, the bit you can see. Here's a picture of an MX5 that's in a very poor state. The outer, inner, inner wheelarch and box sections required replacing.

A Serious Sill Repair!

After cutting the rusty outer sill away,almost all of the inner parts where in poor condition.

To enable a good quality weld, all the rusty metal needs to be removed and the surface gound back. This pictures shows the work part way through, the inner wheel arch (back of the sill) is already in position.

New metal is then bent to the correct pattern, the bottom sill edge and the rear corner are made from a single peice of metel then welded into place. Here is the same sill partially complete and almost ready for final finishing.

The box section of this one was replaced too.

The sill undergoes preparation for painting, it is cleaned, primered and then painted. Depending on the car, this may require a number of coats and a clear coat.

 

Then it'll be returned looking like this.

We'll even do the lower sill black if the car had that. We try and make the car look as original as possible.

 

Recently, one of our customers cars won a concourse competition at the MX5 Owners Club National Event for Best Original Car. We have rebuilt both sills and wheelarches!

Call us today: 01489 896907

 

KEEPING YOUR 5 ALIVE

How to Find Us:

Workshop and Office

Unit 12, Woodmans Farm.

Curdridge Lane, Near Waltham Chase, Southampton. Hampshire SO32 2BH

Contact us NOW:

If you have any queries or wish to make an appointment, please call us:

 

01489 896907

 

Or use our contact form.

 

We are open from 09:00 until 17:00 weekdays and 10:00 until 14:00 Saturdays. Calls upto 15:30 weekdays, please.

Print Print | Sitemap
Copyright 2015 - DoctorMX5